Details
If you want to communicate to an EIP Device, you might be asked to enter some information regarding the In-Sight Camera/Device communicating with it.
All the information: the IP Address, Vendor ID, Device Type, Product Code, Input Size (words), Output Size (words), RPI (ms), Assembly Instance (Input), Assembly Instance (Output), Configuration Instance are stored in the EDS file available at the installation folder:
DataMan: C:\Program Files (x86)\Cognex\DataMan\DataMan Software [ver]\Tools
In-Sight: C:\Program Files (x86)\Cognex\In-Sight\In-Sight Explorer [ver]\Factory Protocol Description
In-Sight VC: C:\Program Files (x86)\Cognex\In-Sight\In-Sight VC Explorer [ver]\Adapters\In-Sight [Multi-Camera|Profiler] [ver]\FFP
CC24/VC5 (VisionPro & Designer): C:\Program Files\Cognex\VisionPro\ffp
Checker: C:\Program Files\Cognex\Checker Vision Sensors [ver]
In-Sight Vision Suite (D900): C:\Program Files\Cognex\In-Sight\In-Sight Vision Suite Adapters\In-Sight ViDi version\FFP\In-Sight D9xx\GSD
In-Sight Vision suite (L4000): C:\Program Files\Cognex\In-Sight\In-Sight Vision Suite Adapters\In-Sight 3D version\FFP
In-Sight vision Suite (IS2800): C:\Program Files\Cognex\In-Sight\In-Sight Vision Suite Editors\In-Sight\In-Sight version\FFP
By opening the eds file with a text editor software, all the information are displayed as: - example of an In-Sight D90x Camera
$ EZ-EDS Version 3.21.1.20161208 Generated Electronic Data Sheet
[File]
DescText = "In-Sight D900 Series Vision System";
CreateDate = 05-01-2019;
CreateTime = 07:41:11;
ModDate = 05-01-2019;
ModTime = 09:11:13;
Revision = 1.1;
HomeURL = "http://www.cognex.com/";
[Device]
VendCode = 678;
VendName = "Cognex";
ProdType = 781;
ProdTypeStr = "In-Sight Vision System";
ProdCode = 3329;
MajRev = 1;
MinRev = 1;
ProdName = "In-Sight D900 Series";
Catalog = "ISD9XX-XX";
Icon = "In-Sight D900 ViDi Sensor.ico";
IconContents = ...
At this link a collection of the information for standard IS serie cameras.
