Question
What is supported on In-Sight 3800 ENET0 and ENET1?
Answer
- ENET0: Connection to In-Sight Vision Suite, Web HMI, TCP/IP, SLMP, OPC/UA, FTP, Profinet, EtherNet/IP.
- ENET1: Connection to In-Sight Vision Suite, Web HMI, TCP/IP, OPC/UA, FTP.
- Restrictions:
- Only one connection to In-Sight Vision Suite at a time is supported. You cannot connect to In-Sight Vision Suite on both ethernet ports simultaneously.
- Only one FFP (Factory Floor Protocol) can be used at once across both ethernet connections. FFPs include Profinet, EtherNet/IP, and SLMP.
- Recommended to use ENET0 for FFP as it is required for both Profinet, Ethernet/IP and SLMP.
- For high-speed applications with FFP, it is recommended to connect to In-Sight Vision Suite with ENET1.
- The Web HMI CAN be connected to by both ethernet ports simultaneously.
- Example Valid Configurations:
- ENET0 = Profinet; ENET1 = ISVS, FTP;
- ENET0 = ISVS; ENET1 = TCP/IP, FTP;
- ENET0 = Profinet, FTP; ENET1 = OPC/UA, ISVS.
