The Output Time is Not Output Even if the "Output Time" of GUI is Checked

Issue:

Even if the function "Output time" added by Ver4.5.0 is enabled by GUI, "Output time" will not be communicated output to PLC.

Probable Causes:

• Ver4.5.0 job "WafID450.job" must be used to print the "Output Time", and if a previous version of the job is used, the "Output Time" checkbox in GUI is ignored. 

  

Solution:

• Rebuild the job based on the "WafID450.job" provided in Ver4.5.0 or later. 
  WafID450.job can be found in the following folders: 
  
  C:\Program Files (x86)\Cognex\In-Sight\In-Sight Wafer ID 4.5.2\Default Files